 |
|
|
Sphaera provides a range of interactive computer based training (CBT) material to aviation training organisations worldwide. The following products are all used by airlines and groundschools. Unless otherwise stated, all products run on a standard PC and are licensed for instructional use.
|
Flight Instrumentation and Indicating Systems |
Electronic flight instrument systems, EFIS and ECAM. |
Airbus A320 CBT
For the instruction of electronic flight instrument systems the A320 CBT delivers approximately 30 minutes of fully-featured student self-paced training (with narration, interactivity, embedded questions and remedial branching) on the EFIS and ECAM. |
£POA |
HSI, RBI, RMI, VOR Indicator and DME. |
VOR Trainer £990 VOR Trainer is a fully interactive program used by groundschools and aerospace engineering colleges to help students understand the function of an HSI, RBI, RMI and VOR Indicator as well as DME. VOR Trainer is also used for practising and perfecting homing, radial tracking and holding patterns around VOR or non-directional beacons. |
£POA |
Gyroscopic principles, rigidity, real wander, transport wander, apparent wander and precession. |
Interactive Gyroscope £490 For the instruction of gyroscopic principles this classroom training aid features a fully interactive gyroscope and model of the Earth, allowing instructors to easily demonstrate rigidity, real wander, transport wander, apparent wander and precession. |
£POA |
Instrument Flying and Air Navigation |
Radio navigation, homing, radial tracking, entry patterns and holding patterns. |
VOR Trainer £POA VOR Trainer is a fully interactive program used by groundschools for familiarisation with HSI, RBI, RMI, VOR Indicators and DME, before being used by students to practise and perfect their homing, radial tracking and holding patterns around VOR or non-directional beacons. |
£POA |
Piston and Gas Turbine Engines |
Gas turbine engine fundamentals
|
Gas Turbine Engines
This package of 4 interactive gas turbine engines can be used flexibly in the classroom to form the basis for many important introductory lessons to gas turbine engines. Clear schematic diagrams allow each engine to be built-up in a series of easy to understand steps, enabling students to observe each phase of the Brayton cycle and appreciate the different approaches to engine design. The engines below provide good examples of single-spool, twin-spool and multi-spool arrangements. Includes Avon Turbojet, Adour Turbofan, CFM56 and RB211.
|
£POA |
Piston engine fundamentals |
2-Stroke Engine FREE This interactive animation clearly demonstrates the working cycle of a 2-stroke engine and enables the instructor or student to play, pause and step. |
|
4-Stroke Engine FREE This interactive animation clearly demonstrates the working cycle of a 4-stroke engine, enabling instructors or to student to play, pause and step. |
|
Gas turbine engine performance |
Engine Altitude Trainer £POA The engine altitude trainer enables instructors to clearly demonstrate the effect that aircraft altitude and velocity has on gas turbine engine performance in the form of changes to gross thrust, net thrust, mass airflow, fuel consumption and velocity of the gas flow. |
£POA |
Can't Find What You Need? |
Our range of COTS (commercial off-the-shelf) aviation training products is complemented by our affordable bespoke CBT production service. So, if what you require is not on this list contact us and we will be delighted to discuss your requirements with you.
|
See also: |
|
Sphaera Training Systems Swansea, UK +44 (0) 771 8830 880 info@sphaera.co.uk |
eLearning & CBTEASA Part 66 CBTAviation Training Learning Management System Moodle 3D Graphics and Animations Training Needs Analysis | Aircraft SystemsGas Turbine EnginesHydraulic Systems Electrical Systems Fuel Systems Weapons Systems Avionics Instrumentation |
AircraftAirbus A320Bombardier Dash 8 Bombardier CRJ200 BAe 146 Hawk Mk 65 Hawk 100 Series  |